KB.15.15

Figure 188 Listing the ACL assignments for a VLAN

Viewing static port (and trunk) ACL assignments

This command lists the identification and types of current static port ACL assignments to individual

switch ports and trunks, as configured in the running-config file. The switch allows one static port

ACL assignment per port.

Syntax:

show access-list ports < all | port-list>

Lists the current static port ACL assignments for ports and trunks in the running config

file.

NOTE: This information also appears in the show running output. If you execute write

memory after configuring an ACL, it also appears in the show config output.

Example

The following output shows IPv4 and IPv6 ACLs configured on various ports and trunks on the

switch:

Figure 189 Listing the ACL assignments for ports and trunks

Viewing specific ACL configuration details

This command displays a specific IPv6 or IPv4 ACL configured in the running config file in an

easy-to-read tabular format.

278 IPv4 Access Control Lists (ACLs)