KB.15.15

12 Authorized IP Managers

Configuring

Viewing and configuring IP Authorized Managers (Menu)

Only IPv4 is supported when using the menu to set the management access method.

From the console Main Menu, select:

2. Switch Configuration …

6. IP Authorized Managers

Figure 303 How to add an authorized manager entry

Figure 304 Edit menu for authorized IP managers

To authorize manager access

This command authorizes manager-level access for any station with an IP address of 10.28.227.0

through 10.28.227.255:

HPswitch(config)# ip authorized-managers 10.28.227.101 255.255.255.0 access manager

Similarly, the next command authorizes manager-level access for any station having an IP address

of 10.28.227.101 through 103:

HPswitch(config)# ip authorized-managers 10.28.227.101 255.255.255.252 access manager

If you omit the < mask bits > when adding a new authorized manager, the switch automatically

uses 255.255.255.255. If you do not specify either Manager or Operator access, the

switchassigns the Manager access.

Configuring 413