Access Security Guide K/KA/KB.15.15
Table 52 Field table (continued)
DescriptionField
Period of time (in seconds) that the switch waits for a server response to an authentication
request.
Server Timeout
Direction in which flow of incoming and outgoing traffic is blocked on 802.1X-aware
port that has not yet entered the authenticated state: Both: Incoming and outgoing traffic
Cntrl Dir
is blocked on port until authentication occurs. In: Only incoming traffic is blocked on
port before authentication occurs. Outgoing traffic with unknown destination addresses
is flooded on the unauthenticated 802.1X-aware port.
Syntax
show port-access authenticator statistics [port-list]
Displays statistical information for all switch ports or specified ports that are enabled
as 802.1X authenticators, including:
• Whether port-access authentication is enabled
◦ Whether RADIUS-assigned dynamic VLANs are supported
◦ 802.1X supplicant’s MAC address as determined by the content of the
last EAPOL frame received on the port
◦ 802.1X traffic statistics from received and transmitted packets
802.1X configuration information for ports that are not enabled as an 802.1X
authenticators is not displayed
Figure 335 show port-access authenticator statistics Command
Syntax
show port-access authenticator session-counters [port-list]
Displays information for active 802.1X authentication sessions on all switch ports
or specified ports that are enabled as 802.1X authenticators, including:
• 802.1X frames received and transmitted on each port
• Duration and status of active 802.1X authentication sessions (in-progress or
terminated)
• User name of 802.1X supplicant included in 802.1X response packets,
configured with the aaa port-access supplicant identity <username> command
(see page 13-49).
802.1X configuration information for ports that are not enabled as an 802.1X
authenticators is not displayed.
Configuring Port-Based Access 469