KB.15.15

Table 53 Output for Determining Open VLAN Mode Status (Figure 13-18, Lower) (continued)

MeaningStatus Indicator

criteria. (You can still configure console, Telnet, or SSH security on the port.)Unauthorized:

Configures the port for “Force Unauthorized”, which blocks access to any device connected

to the port, regardless of whether the device meets 802.1X criteria.

< vlan-id >: Lists the VID of the static VLAN configured as the unauthorized VLAN for the

indicated port.0: No unauthorized VLAN has been configured for the indicated port.

Unauthorized VLAN ID

< vlan-id >: Lists the VID of the static VLAN configured as the authorized VLAN for the

indicated port.0: No authorized VLAN has been configured for the indicated port.

Authorized VLAN ID

Closed: Either no client is connected or the connected client has not received authorization

through 802.1X authentication.Open: An authorized 802.1X supplicant is connected to

the port.

Status

< vlan-id >: Lists the VID of the static, untagged VLAN to which the port currently

belongs.No PVID: The port is not an untagged member of any VLAN.

Current VLAN ID

See “RADIUS Authentication, Authorization, and Accounting” (page 141).Current Port CoS

% Curr. Rate Limit Inbound

Syntax

show vlan < vlan-id >

Displays the port status for the selected VLAN, including an indication of which port

memberships have been temporarily overridden by Open VLAN mode.

Figure 341 Showing a VLAN with Ports Configured for Open VLAN Mode

Show Commands for Port-Access Supplicant

Syntax

show port-access supplicant [< port-list >] [statistics]

show port-access supplicant [< port-list >]

Configuring Port-Based Access 473