Access Security Guide K/KA/KB.15.15

ta-profile-name
The Trust Anchor Profile associated with the certificate.
local certificate
Local Certificate to be copied.
ip-addr
IP address of the server.
file-name
Name of the certificate file.
ipv6–addr
Specify TFTP server IPv6 address.
host-name-str
Specify hostname of the SFTP server.
user
Specify the username on the remote system.
username@ip-str
Specify the username along with remote system information (hostname, IPv4 or
IPv6 address.)
port
TCP port of the SSH server on the remote system.
NOTE: The loaded certificate is validated against a pending Certificate Request
and the maximum number of intermediate certificates allowed is 3 (with a maximum
of 5 certificates in a chain). Intermediate certificates must either be loaded before
the local certificate or are included as part of the local certificate.
Debug logging
The following command enables/disables debug logs.
Syntax
(config)# [no] debug security <crypto>
Definitions
crypto
Display all Crypto messages.
Certificate specific
This command has two forms of output, summary and detailed. The CLI displays certificate details
if a name is given. If argument summary or no argument is entered, a brief about all certificates
is printed.
Syntax
(Switch_Name#)show crypto pki local-certificate
summary|<cert-name>
Show local certificate information.
Example
Sample summary output:
Debug logging 513