Access Security Guide K/KA/KB.15.15

The output format for the TA certificate is same as the format for “Certificate details” provided
above. The “Status” field lists the total number of certificates, including both intermediates and
local, that references this trust anchor. Intermediate certificates are shown with the local (leaf)
certificates, as the certificates “under” an anchor form a tree rather than a list.
NOTE: This command is not available on the web UI.
Certificate details
Show the configured switch identity.
Syntax
(Switch_Name#) show crypto pki <identity-profile>
Definitions
identity-profile
Displays the configured Id profile related information.
Example
Sample output:
Switch Identity:
Common Name (CN) : <max 64 chars>
Org Unit (OU) : <max 32 chars>
Org Name (O) : <max 32 chars>
Locality (L) : <max 32 chars>
State (ST) : <max 4 chars>
Country (C) : <max 4 chars>
NOTE: Blank fields display as empty, except for Common Name. Since Common
Name is a required field, it displays as not configured when empty.
This command is not available with the web UI. If configured, the ID profile is
displayed in the Web UI.
Display PKI certificate
Syntax
display pki certificate <ca|local>|request-status
Definitions
pki
Display PKI information.
certificate
Display certificate configuration information.
ca
CA certificate.
local
Local certificate.
request-status
Request status information.
Example
<Sysname> display pki certificate local
516 Certificate manager