KB.15.15

"Less Than": To have a match with the ACE entry, the TCP or UDP source-port

number in a packet must be less than the specified port number.

neq <port-nbr-or-name>

"Not Equal": To have a match with the ACE entry, the TCP or UDP source-port

number in a packet must not be equal to the specified port number.

range <start-port-nbr/name> <end-port-nbr/name>

To have a match with the ACE entry, the TCP or UDP source-port number in a packet

must be in the range <start-port-nbr/name> <end-port-nbr/name>.

tcp-data or udp-data

TCP or UDPPort Number or (Well-Known) Port Name:

Use the TCP or UDP port number required for the desired match. The switch also

accepts certain well-known TCP or UDP port names as alternates to their

corresponding port numbers:

TCP/UDP-PORT:

Specify port by number.

bootpc

Bootstrap Protocol, client (68)

bootps

Bootstrap Protocol, server (67)

dns

Domain Name Service (53)

ntp

Network Time Protocol (123)

radius

Remote Authentication Dial-In User Service (1812)

radius-old

Remote Authentication Dial-In User Service (1645)

rip

Routing Information Protocol (520)

snmp

Simple Network Management Protocol (161)

snmp-trap

Simple Network Management Protocol (162)

tftp

Trivial File Transfer Protocol (69)

Configuring and applying connection-rate ACLs 61