Basic Operation Guide 2014/02

Example 85 Configuration file in TFTP server with DHCP/Bootp specified as the IP addressing source
HP Switch(config)# show run
Running configuration:
; J9091A Configuration Editor; Created on release #K.15.10.0001
hostname "HP Switch"
module 1 type J8702A
module 2 type J8705A
trunk A11-A12 Trk1 Trunk
ip default-gateway 10.10.10.115
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged A1-A10,A13-A24,B1-B24,Trk1
ip address dhcp-bootp
exit
spanning-tree Trk1 priority 4
password manager
password operator
If you apply this configuration file to “Example of IP Preserve operation with multiple series switches”
(page 115), switches 1 - 3 will still retain their manually assigned IP addressing. However, switch
4 will be configured with the IP addressing included in the file.
116 Configuring IP Addressing