Basic Operation Guide 2014/02

Example 93 Detailed information displayed for each protocol
HP Switch(config)# show ip source-interface detail
Source-IP Detailed Information
Protocol : Tacacs
Admin Policy : Configured IP Interface
Oper Policy : Configured IP Interface
Source IP Interface : vlan 22
Source IP Address : 10.10.10.4
Source Interface State : Up
Protocol : Radius
Admin Policy : Configured IP Address
Oper Policy : Configured IP Address
Source IP Interface : vlan 3
Source IP Address : 10.10.10.2
Source Interface State : Up
Protocol : Syslog
Admin Policy : Configured IP Interface
Oper Policy : Configured IP Interface
Source IP Interface : vlan 10
Source IP Address : 10.10.10.10
Source Interface State : Up
Protocol : Telnet
Admin Policy : Configured IP Interface
Oper Policy : Configured IP Interface
Source IP Interface : loopback 1
Source IP Address : 10.10.10.11
Source Interface State : Up
Protocol : Tftp
Admin Policy : Outgoing Interface
Oper Policy : Outgoing Interface
Source IP Interface : N/A
Source IP Address : N/A
Source Interface State : N/A
Protocol : Sntp
Admin Policy : Outgoing Interface
Oper Policy : Outgoing Interface
Source IP Interface : N/A
Source IP Address : N/A
Source Interface State : N/A
Protocl : Sflow
Admin Policy : Outgoing Interface
Oper Policy : Outgoing Interface
Source IP Interface : N/A
Source IP Address : N/A
Source Interface State : N/A
The show command can also be used with the application to display the source IP address selection
information in effect for the application protocol.
122 Configuring IP Addressing