Basic Operation Guide 2014/02

Figure 18 Example of reboot process and making changes to the startup-config file
Creating an alternate startup-config file. There are two methods for creating a new configuration
file:
• Copy an existing startup-config file to a new filename, then reboot the switch, make the desired
changes to the running-config file, then execute write memory. (See “Example of reboot
process and making changes to the startup-config file” (page 74).)
• Erase the active startup-config file. This generates a new, default startupconfig file that always
results when the switch automatically reboots after deletion of the currently active startup-config
file. (See “Creating a new startup-config file” (page 77).)
Transitioning to multiple configuration files
At the first reboot with a software release supporting multiple configuration, the switch:
• Assigns the filename oldConfig to the existing startup-config file (which is stored in memory
slot 1).
• Saves a copy of the existing startup-config file in memory slot 2 with the filename
workingConfig.
• Assigns the workingConfig file as the active configuration and the default configuration
for all subsequent reboots using either primary or secondary flash.
74 Switch Memory and Configuration