Basic Operation Guide 2014/02

Example 64 Running config output for a range of interfaces
HP Switch(config)# no stack
HP Switch(config)# mesh 2-3
Command will take effect after saving configuration and reboot.
HP Switch(config)# write memory
HP Switch(config)# reload
HP Switch# show running-config interface 2-3
Running configuration:
interface 2
untagged vlan 1
mesh
exit
interface 3
flow-control
untagged vlan 1
mesh
exit
The example below is an example of the running config output showing VLAN information.
Display configuration of selected interface 85