Basic Operation Guide 2014/02

Example 65 Running config output showing VLAN information
HP Switch(config)# show running-config
Running configuration:
; J8698A Configuration Editor; Created on release #K.15.10.0001
; Ver #02:0b:ef:e6
hostname "HP Switch"
module 1 type J9309A
module 3 type J8702A
module 6 type J8702A
ip routing
vlan 1
name "DEFAULT_VLAN"
untagged A1-A4,C1-C24,F1-F24
ip address dhcp-bootp
exit
vlan 2
name "test-vlan-2"
ip helper-address 4.1.1.1
ip helper-address 5.1.1.1
ip address 1.1.1.1 255.255.255.0
ipv6 address 2001::/64 anycast
ipv6 enable
exit
vlan 3
name "VLAN3"
ip helper-address 7.1.1.1
ip forward-protocol udp 7.1.1.1 snmp
ip forward-protocol udp 11.1.1.2 dns
no ip address
exit
vlan 4
name "VLAN4"
ip address 5.1.1.1 255.255.255.0
ip bootp-gateway 5.1.1.1
exit
logging 10.0.102.90
logging system-module ospf
ip route 5.1.1.0 255.255.255.0 vlan 4 distance 3
In the example below, the configuration information for VLAN 4 is now displayed in one place.
86 Switch Memory and Configuration