Basic Operation Guide 2014/02

Note: For the 5400zl, 3800, and 8200zl switches, when the command is executed
in enhanced secure mode the following prompt displays:
Do you want to show sensitive information(y/n)?
If ‘y’ is entered, the normal command output is displayed on the console. If ‘n’ is
entered, all the sensitive information is hidden and will be displayed as asterisks
(‘*****’). The default option is ‘n’ when interactive mode is disabled. For more
information, see the chapter "Secure Mode (5400zl, 3800, and 8200zl)" in the
Access Security Guide for your switch.
Example 68 Startup configuration output
HP Switch(config)# show config
Startup configuration:
; J8698A Configuration Editor; Created on release #K.14.54C
; Ver #02:0b:ef:e6
hostname "HP Switch"
module 1 type J9309A
module 3 type J8702A
module 6 type J8702A
vlan 1
name "DEFAULT_VLAN"
untagged A1-A4,C1-C9,C15-C24,F1-F24
ip address dhcp-bootp
no untagged C10-C14
exit
vlan 5
name "VLAN5"
untagged C10-C14
ip address 5.1.1.1 255.255.255.128
exit
interface loopback 5
ip address 7.1.1.1
exit
interface loopback 7
ip address 12.1.1.1
exit
snmp-server community "public" unrestricted
Below is an example of the startup config output for a selected VLAN.
Example 69 Startup config output for a specific VLAN
HP Switch(vlan-5)# show config vlan 5
Startup configuration:
vlan 5
name "VLAN5"
untagged C10-C14
ip address 5.1.1.1 255.255.255.128
exit
Below shows an example of the startup config output for a range of interfaces for a specific VLAN.
88 Switch Memory and Configuration