Manualshelf

HP 5400R zl2 Power Supply Quick Setup Guide and Safety/Regulatory Information

ManualsBrandsHP ManualsNetwork HardwareHP 5406R-8XGT/8SFP+ (No PSU) v2 zl2 Switch
1234
1
HP 5400R zl2 Switches Power Supply Quick Setup Guide and
Safety/Regulatory Information
The drawings used in this document are for illustration purposes only and may not exactly match your particular switch.
For complete installation instructions, see the H
P 5400R zl2 Power Supply Installation Guide on the HP Networking Web
site at: www.hp.com/networking/support
Auto search on “zl modules,” and select your module from the list. Click Display selected, and then click on the links that
have Manuals listed to get on to the webpage that lists the available manuals.
Power supply instructions
!
During the installation, ensure that AC power is NOT connected to the Power Supply.
Power Supply Slots:
■ HP recommends that you install the same model of power supplies in a switch.
■ See the HP 5400R zl2 Installation and Getting Started Guide for selecting the correct power cord to use with the supply.
1. Remove the slot cover plate.
2. Align the power supply in the switch slot and insert
it un
til the external wall of the power supply is flush
with the switch chassis.
3. Tighten the retaining screws to secure the power
supp
ly to the switch.
1 Grounding Lug
Mounting Holes
2 Power Supply Slots

Summary of content (4 pages)