Management and Configuration Guide K/KA/KB.15.15
Example 71 Show power-over-etherne
The command show power-over-ethernet displays data similar to that shown in Figure
Figure 44 (page 118).
Figure 44 show power-over-ethernet command output
Viewing PoE status on all ports
Syntax
show power-over-ethernet brief
Displays the port power status.
• PoE Port
Lists all PoE-capable ports on the switch.
• Power Enable
Shows Yes for ports enabled to support PoE (the default) and No for ports on
which PoE is disabled.
• Power Priority
Lists the power priority (Low, High, and Critical) configured on ports enabled
for PoE.
• Alloc by
Displays how PoE is allocated (usage, class, value)
• Alloc Power
The maximum amount of PoE power allocated for that port (expressed in watts.)
nl
Default: 17 watts for PoE; 33 watts for PoE+.
• Actual Power
The power actually being used on that port.
• Configured Type
If configured, shows the user-specified identifier for the port. If not configured,
this field is empty.
118 Power Over Ethernet (PoE/PoE+) Operation