Management and Configuration Guide K/KA/KB.15.15
• Detection Status:
Searching: The port is trying to detect a PD connection.◦
◦ Delivering: The port is delivering power to a PD.
◦ Disabled: On the indicated port, either PoE support is disabled or PoE
power is enabled but the PoE module does not have enough power
available to supply the port's power needs.
◦ Fault: The switch detects a problem with the connected PD.
◦ Other Fault: The switch has detected an internal fault that prevents it from
supplying power on that port.
• Power Class Shows the 802.3af power class of the PD detected on the indicated
port.
Table 6 Power Classes
DescriptionPower class
0.44 to 12.95 watts can be drawn by the PD. Default class.0
0.44 to 3.84 watts1
3.84 to 6.49 watts2
6.49 to 12.95 watts3
For PoE+; up to 25.5 watts can be drawn by the PD4
Viewing PoE status on all ports 119