KB.15.15

Example 72 Show power-over-ethernet brief

show power-over-ethernet brief displays this output:

Figure 45 show power-over-ethernet brief command output

You can also show the PoE information by slot:

Figure 46 Showing the PoE information by slot

Viewing the PoE status on specific ports

Syntax

show power-over-ethernet <port-list>

Displays the following PoE status and statistics (since the last reboot) for each port

in <port-list>:

Shows Yes for ports enabled to support PoE (the default) and No for ports

on which PoE is disabled. For ports on which power is disabled, this is the

only field displayed by show power-over-ethernet <port-list>.

Power Enable

Lists the power priority (Low, High, and Critical) configured on ports enabled

for PoE.

Priority

How PoE is allocated (usage, class, value.)Allocate by

Detection Status Searching The port is available to support a PD.

Delivering The port is delivering power to a PD.

Disabled PoE power is enabled on the port but the PoE module

does not have enough power available to supply the port's

power needs.

Fault The switch detects a problem with the connected PD.

120 Power Over Ethernet (PoE/PoE+) Operation