KB.15.15

Figure 53 Running config file when L4-based trunk load balancing is enabled

Viewing trunk load balancing

The show trunks load-balance interface command displays the port on which the information will

be forwarded out for the specified traffic flow with the specified source and destination address.

Syntax

show trunks load-balance interface trunk-id mac src-addr dest-addr [ip

src-addr dest-addr [[src-tcp-port] | [src-upd-port] [[dest-tcp-port] |

[dest-udp-port]]]]

inbound-port port-num

Displays the port on which the information will be forwarded out for the specified traffic flow with

the specified source and destination address.

trunk-id The trunk id (trk1, trk2, etc.)

mac src-addr dest-addr The source MAC address and the destination MAC address.

ip src-addr dest-addr The source IPv4 /IPv6 address and the destination IPv4/IPv6

address.

[src-tcp-port|src-udp-port] The source TCP port or

the source UDP port.

[dest-tcp-port|dest-udp-port] The destination TCP

port or the destination

UDP port.

inbound-port port-num the port number of which the traffic is received.

Viewing trunk load balancing 139