Management and Configuration Guide K/KA/KB.15.15

Port Enabled Group Status Partner Status Key
----- --------- ------- --------- --------- ------ -----
A5 Active Trk10 Up Yes Sucess 200
A6 Active Trk10 Up Yes Sucess 200
Syntax
show distributed trunk consistency parameters global
This command displays configured features on VLANs that have dt‐lacp or dt‐trunk
ports as member port. This command also displays VLAN memberships and
loop‐protect status of a given DT trunk. You can use this command to determine if
there is any mismatch in the configuration parameters on VLANs configured for DT
ports or on DT interfaces.
Example
show distributed trunk consistency parameters global
Local Peer
Image Version K.15.XX K.15.XX
IP Routing Enabled Enabled
Peer keepalive interval (ms) 1000 1000
IGMP enabled VLANs on Local : 1 10, 100 110, 501 ,600
610 ,800
IGMP enabled VLANs on Peer : 1 10, 100 110, 501 ,600
DHCP snooping enabled VLANs on Local : 1,2
DHCP snooping enabled VLANs on Peer : 1
Loop protect enabled VLANs on Local : 1,4
Loop protect enabled VLANs on Peer : 1,5
MLD enabled VLANs on Local : 1 10
MLD enabled VLANs on Peer : 1 10
Example
Show distributed trunk
consistency parameters trunk <trk1...trkN>
Allowed VLANs on Local : 1 10, 100 110, 501 ,600
610 ,800
Allowed VLANs on Peer : 1 10, 100 110, 501 ,600
610 ,800
Name Local Value Peer Value
------ --------
Loop protect Enabled Enabled
Viewing peer-keepalive configuration
Syntax
show distributed-trunking peer-keepalive
Displays information about peer-keepalive parameters.
142 Port Trunking