KB.15.15

Figure 100 Display of source IP address configuration

Viewing SNMP notification configuration

Syntax

show snmp-server

Displays the currently configured notification settings for versions SNMPv1 and

SNMPv2c traps, including SNMP communities, trap receivers, link-change traps,

and network security notifications.

Example

In the following example, the show snmp-server command output shows that the switch has

been configured to send SNMP traps and notifications to management stations that belong to the

"public," "red-team," and "blue-team" communities.

Figure 101 Display of SNMP notification configuration

Configuring the MAC address count option

The MAC Address Count feature provides a way to notify the switch management system when

the number of MAC addresses learned on a switch port exceeds the permitted configurable number.

To enable the mac-count-notify option, enter this command in global config context.

Syntax

[no]snmp-server enable traps mac-count-notify

Sends a trap when the number of MAC addresses learned on the specified ports

exceeds the configured <learned-count> value.

To configure the mac-count-notify option on a port or ports, enter this command. When the

configured number of MAC addresses is exceeded (the learned-count), a trap is sent.

212 Configuring for Network Management Applications