Management and Configuration Guide K/KA/KB.15.15

(HP_Switch_name#) show lldp config
LLDP Global Configuration
LLDP Enabled [Yes] : Yes
LLDP Transmit Interval [30] : 30
LLDP Hold time Multiplier [4] : 4
LLDP Delay Interval [2] : 2
LLDP Reinit Interval [2] : 2
LLDP Notification Interval [5] : 5
LLDP Fast Start Count [5] : 5
LLDP Port Configuration
Port | AdminStatus NotificationEnabled Med Topology Trap Enabled
---- + ----------- ------------------- -------------------------
A1 | Tx_Rx False False
A2 | Tx_Rx False False
A3 | Tx_Rx False False
A4 | Tx_Rx False False
A5 | Tx_Rx False False
A6 | Tx_Rx False False
A7 | Tx_Rx False False
A8 | Tx_Rx False False
NOTE: The values displayed in the LLDP column correspond to the lldp refresh-interval
command
Viewing port configuration details
Syntax
show lldp config <port-list>
Displays the LLDP port-specific configuration for all ports in <port-list> , including which
optional TLVs and any non-default IP address that are included in the port's outbound advertisements.
Figure 107 Per-port configuration display
Enabling or disabling LLDP operation on the switch
Syntax
[no] lldp run
Enables or disables LLDP operation on the switch.
The no form of the command, regardless of individual LLDP port configurations, prevents the switch
from transmitting outbound LLDP advertisements and causes the switch to drop all LLDP advertisements
received from other devices.
220 Configuring for Network Management Applications