Management and Configuration Guide K/KA/KB.15.15

Trap-interval : 30
Port MAC Addresses trap learned/removed/aged
------ ---------------------------------------
1 Learned, Removed & Aged
2 Removed & Aged
3 Learned & Aged
4 Learned & Removed
5 Aged
6 Learned
7 Removed
Example
For port 1 the command would be as follows
show mac-notify traps 1
Displays the following information:
1 Aged
SNMP trap when power supply is inserted or removed
SNMP traps generate while inserting or removing a powered up Power Supply Unit (PSU) without
pulling out the power cable and also when removing a powered down PSU from the HP Switch
5406 Series. RMON log events are used to generate SNMP traps for PSU insertion and removal
in both powered up and powered down states.
Log Event
Chassis: Power Supply 1 inserted
Chassis: Power Supply 1 removed while powered
Chassis: Power Supply 2 removed while not powered
Example
Power Supply inserted while powered off:
W 09/13/13 09:10:18 03834 chassis: AM1: Power Supply 1 inserted
W 09/13/13 09:10:19 00071 chassis: AM1: Power Supply failure: Supply: 1, Failures: 4
Example
Power Supply inserted while powered on:
W 09/13/13 09:06:20 03834 chassis: AM1: Power Supply 1 inserted
W 09/13/13 09:06:21 00071 chassis: AM1: Power Supply OK: Supply: 1, Failures: 2
Example
Power Supply removed while powered off:
W 09/13/13 09:08:57 03835 chassis: AM1: Power Supply 1 removed while not powered
W 09/13/13 09:08:57 00071 chassis: AM1: Power Supply failure: Supply: 1, Failures: 3
Example
Power Supply inserted while powered on:
W 09/13/13 09:03:36 03835 chassis: AM1: Power Supply 1 removed while powered
W 09/13/13 09:03:36 00071 chassis: AM1: Power Supply failure: Supply: 1, Failures: 2
SNMP notifications 247