KB.15.15

9 Monitoring and Analyzing Switch Operation

Status and counters data

This section describes the status and counters screens available through the switch console interface

and/or the WebAgent.

NOTE: You can access all console screens from the WebAgent via Telnet to the console. Telnet

access to the switch is available in the Device View window under the Configuration tab.

Accessing status and counters (Menu)

Beginning at the Main Menu, display the Status and Counters menu by selecting:

1. Status and Counters

Figure 138 The Status and Counters menu

Each of the above menu items accesses the read-only screens described on the following pages.

See the online help for a description of the entries displayed in these screens.

Viewing system information

Syntax

show system [ chassislocate | information | power-supply |

temperature | fans ]

Displays global system information and operational parameters for the switch.

Displays the chassisLocator LED status. Possible values are ON, Off,

or Blink.

chassislocate

When the status is On or Blink, the number of minutes that the Locator

LED will continue to be on or to blink is displayed. (See figure

Figure 139 (page 303).)

Displays global system information and operational parameters for

the switch. (See Figure 141 (page 303).)

information

Shows chassis power supply and settings.power-supply

Shows system temperature and settings.temperature

Shows system fan status. (See Figure 140 (page 303).)fans

302 Monitoring and Analyzing Switch Operation