KB.15.15

Provides traffic details for the ports you specify.

Resetting the port counters

It is useful to be able to clear all counters and statistics without rebooting the switch when

troubleshooting network issues. The clear statistics global command clears all counters

and statistics for all interfaces except SNMP. You can also clear the counters and statistics for an

individual port using the clear statistics <port-list> command.

Syntax

clear statistics [ <port-list> | global ]

When executed with the <port-list> option, clears the counters and statistics

for an individual port.

When executed with the global option, clears all counters and statistics for all

interfaces except SNMP.

The show interfaces <port-list> command displays the totals accumulated since the last

boot or the last clear statistics command was executed. The menu page also displays these

totals.

SNMP displays the counter and statistics totals accumulated since the last reboot; it is not affected

by the clear statistics global command or the clear statistics <port-list>

command. An SNMP trap is sent whenever the statistics are cleared.

Viewing port and trunk group statistics (WebAgent)

1. In the navigation pane of the WebAgent, click Interface.

2. Click Port Info/Config.

For information about this screen, click ? in the upper right corner of the WebAgent screen.

NOTE: to reset the port counters to zero, you must reboot the switch.

Accessing port and trunk statistics (Menu)

From the Main Menu, select:

1. Status and Counters ...

4. Port Counters

Figure 150 Example of port counters on the menu interface

Accessing port and trunk statistics (Menu) 309