KB.15.15

1. From the Main Menu, select:

1. Status and Counters ...

7. Port Address Table

Figure 154 Listing MAC addresses for a specific port

2. Use the Space bar to select the port you want to list or search for MAC addresses, then press

[Enter] to list the MAC addresses detected on that port.

Determining whether a specific device is connected to the selected port

Proceeding from step 2 (page 313), above:

1. Press [S] (for Search), to display the following prompt:

Enter MAC address: _

2. Enter the MAC address you want to locate and press [Enter].

The address is highlighted if found. If the switch does not find the address, it leaves the MAC

address listing empty.

3. Press [P] (for Prev page) to return to the previous per-port listing.

Accessing MSTP Data

Syntax

show spanning-tree

Displays the switch's global and regional spanning-tree status, plus the per-port

spanning-tree operation at the regional level.

Values for the following parameters appear only for ports connected to active

devices: Designated Bridge, Hello Time, PtP, and Edge.

Accessing MSTP Data 313