KB.15.15

Example

Figure 174 Displaying mirroring sources and sessions in the running configurations

Information about remote endpoints configured for remote sessions on the switch

begin with the mirror endpoint keywords. In the following example, two remote

sessions use the same exit port:

Figure 175 Displaying remote mirroring endpoints in the running configuration

Switch and network operations

The switches have several built-in tools for monitoring, analyzing, and troubleshooting switch and

network operation:

• Status

Includes options for displaying general switch information, management address data, port

status, port and trunk group statistics, MAC addresses detected on each port or VLAN, and

STP, IGMP, and VLAN data (page B-6 (page 302).)

• Counters

Display details of traffic volume on individual ports (“Accessing port and trunk statistics (Menu)”

(page 309).)

• Event Log

Lists switch operating events (“Using the Event Log for troubleshooting switch problems”

(page 382) .)

• Configurable trap receivers

Uses SNMP to enable management stations on your network to receive SNMP traps from the

switch.

• Port monitoring (mirroring)

Copy all traffic from the specified ports to a designated monitoring port .

Switch and network operations 339