KB.15.15

By default, the show logging command displays the log messages recorded

since the last reboot in chronological order:

Displays all recorded log messages, including those before

the last reboot.

-a

Displays log events as the time since the last reboot instead

of in a date/time format.

-b

Displays all recorded log messages, with themost recent

entries listed first (reverse order.)

-r

Displays all errors in the event class.-e

Displays the active management module (AM) and standby

management module (SM) log events.

-s

Displays the log events with a granularity of 10 milliseconds.-t

Displays only major log events.-m

Displays only performance log events.-p

Displays only warning log events.-w

Displays only informational log events.-i

Displays only debug log events.-d

Displays all Event Log entries that contain the specified text.

Use an option-str value with -a or -r to further filter

show logging command output.

option-str

Example

To display all Event Log messages that have "system" in the message text or module

name, enter the following command:

HP Switch# show logging -a system

To display all Event Log messages recorded since the last reboot that have the word

"system" in the message text or module name, enter:

HP Switch# show logging system

Viewing the event log from the menu

To view the Event Log from the Main Menu, select Event Log. Figure 203 (page 392) shows a

sample event log display.

Unusual network activity 391