Management and Configuration Guide K/KA/KB.15.15

lsa-generation—New
LSAs added to database.
packet [packet-type]
— All OSPF packet messages
sent and received on the
switch, where packet-type
enables only the specified
OSPF packet type. Valid
values are:
dd—Database descriptions
hello—Hello messages
lsa—Link-state advertisements
lsr—Link-state requests
lsu—Link-state updates
retransmission—Retransmission timer
messages.
spf—Path recalculation messages.
Enables OSPFv3 debug messages.ip [ospfv3]
ip [pim [packet filter source ip-addr | vlan vid ]]
For the configured debug destinations:
packet— Enables the specified PIM message
type
filter— Enables or disables tracing of PIM
messages filtered on VLAN or source group
information.
source ip-addr — Displays packets from
a specific source to a specific group. Only a
single source/group filter is supported.
vlan vlan-id— Enables or disables tracing
on a specified VLAN for PIM
Debug/syslog operation 409