KB.15.15

services slot-id-range

Displays debug messages on the services module.

Enter an alphabetic module ID or range of module

IDs for the slot-id-range parameter.

snmp event | pdu | routines

Displays the SNMP debug messages.

event—Displays SNMP event debug messages.

pdu—Displays SNMP pdu debug messages.

routines—Displays SNMP routines debug

messages

Displays VRRP debug messages on the configured

destinations.

vrrp

wireless-services slot-id-range

Displays wireless-services debug messages on the

wireless services module. Enter an alphabetic

module ID or range of IDs for the

slot-id-range parameter.

Filtering debug messages by debug type

Debug message filtering provides the ability to filter debug messages by debug type. Multiple

debug filters can be applied to a debug type.

Syntax

[ no ] debug debug type include [ ip ip-addr list | port

<port-list> | vlan vid-list ]

Enables or disables debug message filtering for a debug type. The filter types are:

IPv4 or IPv6 address list Port list VLAN list

Default: Disabled

Figure 209 Example of setting an SNMP event filter for an IP address

412 Troubleshooting