Management and Configuration Guide K/KA/KB.15.15

Examples
Figure 212 Configuring UDP for logging message transmission using the default
port
Figure 213 Configuring TCP for logging message transmission using a specified port
Figure 214 Configuring UDP for logging message transmission using the default
port
Figure 215 Configuring UDP for logging message transmission using a specified
port
Syntax
[ no ] logging facility facility-name
The logging facility specifies the destination subsystem used in a configured syslog
server. (All configured syslog servers must use the same subsystem.) HP recommends
the default (user) subsystem unless your application specifically requires another
subsystem. Options include:
(default) Random user-level messagesuser
Kernel messageskern
Mail systemmail
System daemonsdaemon
Security/authorization messagesauth
Messages generated internally by syslogsyslog
Line-printer subsystemlpr
Netnews subsystemnews
uucp subsystemuucp
cron/at subsystemcron
cron/at subsystemsys9
Reserved for system usesys10 - sys14
Reserved for system uselocal10 - local17
Use the no form of the command to remove the configured facility and reconfigure
the default (user) value.
Debug/syslog operation 417