KB.15.15

Figure 12 SNTP configuration

Syntax

show management

This command can help you to easily examine and compare the IP addressing on

the switch. It lists the IP addresses for all time servers configured on the switch, plus

the IP addresses and default gateway for all VLANs configured on the switch.

Figure 13 Display showing IP addressing for all configured time servers and VLANs

Enabling or disabling the SNTP mode

If you want to prevent SNTP from being used even if it is selected by timesync (or the Menu

interface's Time Sync Method parameter), configure the SNTP mode as disabled.

Syntax

no sntp

Disables SNTP by changing the SNTP mode configuration to Disabled.

Example

If the switch is running SNTP in unicast mode with an SNTP server at 10.28.227.141 and a server

version of 3 (the default), no sntp changes the SNTP configuration as shown below and disables

time synchronization on the switch.

Enabling or disabling the SNTP mode 43