KB.15.15

Locates a switch by using the blue Locate LED on the front panel.

Blinks the chassis Locate LED for a specified

number of minutes (Default: 30 minutes.)

blink 1-1440

Turns the chassis Locate LED on for a specified

number of minutes (Default: 30 minutes.)

on 1-1440

Turns the chassis Locate LED off.off

Example

Figure 244 Locating a switch with the chassislocate command

For redundant management systems, if the active management module failsover,

the Locator LED does not remain lit.

Transceiver information

This features provides the ability to view diagnostic monitoring information for transceivers with

Diagnostic Optical Monitoring (DOM) support. The following transceivers are supported:

DescriptionProduct #

10GbE X2–SC SR OpticJ8436A

10GbE X2–SC LR OpticJ8437A

Gigabit-SX-LC Mini-GBICJ4858A

Gigabit-SX-LC Mini-GBICJ4858B

Gigabit-SX-LC Mini-GBICJ4858C

The J4858C transceivers that have the letters “VM” in their serial numbers do not support DOM.

Syntax

show interfaces transceiver <port-list> detail

Displays information about the transceivers. If a port is specified, displays information for the

transceiver in that port.

detail Displays detailed transceiver information.

450 Troubleshooting