Management and Configuration Guide K/KA/KB.15.15

Example 119 Example of output for a specified transceiver
The output for show interfaces transceiver <port-list> is shown below. You can
specify multiple ports, separated by commas, and the information for each transceiver will display.
HP Switch(config)# show interfaces transceiver 21
Transceiver Technical information:
Product Serial Part
Port Type Number Number Number
------- ----------- ------------ ------------------ ----------
21 1000SX J4858C MY050VM9WB 1990-3657
Example 120 Example of output when no transceiver is present in specified interface
If there is no transceiver in the port specified in the command, the output displays as shown below.
HP Switch(config)# show interfaces transceiver 22
No Transceiver found on interface 22
Example 121 Example of output when no ports are specified
When no ports are specified, information for all transceivers found is displayed.
HP Switch(config)# show interfaces transceiver
Transceiver Technical information:
Product Serial Part
Port Type Number Number Number
------- ----------- ------------ ------------------ ----------
21 1000SX J4858C MY050VM9WB 1990-3657
22 1000SX J4858B P834DIP2
Example 122 Example of output when “all” is specified
You can specify all for <port-list> as shown below.
HP Switch(config)# show interfaces transceiver all
No Transceiver found on interface 1
No Transceiver found on interface 2
.
.
.
No Transceiver found on interface 24
Transceiver Technical information:
Product Serial Part
Port Type Number Number Number
------- ----------- ------------ ------------------ ----------
21 1000SX J4858C MY050VM9WB 1990-3657
22 1000SX J4858B P834DIP2
Transceiver information 451