Management and Configuration Guide K/KA/KB.15.15

Example
Figure 266 Log file listing
Copying crash file information to another file
Crash logs for all modules are always available on the active management module. You can use
the copy crash-log and copy crash-data commands to copy the information to a file of
your choice.
Syntax
copy crash-log [ slot-id | mm ] tftp ip-address filename
Copies the crash logs of both the active and standby management modules to a user-specified file.
If no parameter is specified, files from all modules (management and interface) are concatenated.
Retrieves the crash log from the module in the specified slot.slot-id
Retrieves the crash logs from both management modules and concatenates
them.
mm
Syntax
copy crash-data [ slot-id | mm ] tftp ip-address filename
Copies the crash data of both the active and standby management modules to a user-specified
file. If no parameter is specified, files from all modules (management and interface) are
concatenated.
Retrieves the crash data from the module in the specified slot.slot-id
Retrieves the crash data from both management modules and concatenates
them.
mm
Viewing saved crash information
Syntax
show boot-history
478 Chassis Redundancy (8200zl Switches)