Management and Configuration Guide K/KA/KB.15.15

Examples
Telnet: no telnet-server
SSH: no ip ssh …
SNMP: no snmp-server …
TFTP: no tftp server
HTTP: no web-management …
The show servers command shows the listen mode of the servers:
HP Switch# show servers
Server listen mode
Server Listen mode
-----------------------------
Telnet | both
Ssh | both
Tftp | both
Web-management | both
Snmp | both
Application client commands
CLI commands for client applications have added the oobm keyword to allow you to specify that
the outgoing request be issued from the OOBM interface. If you do not specify the oobm keyword,
the request will be issued from the appropriate in-band data interface. Command syntax is:
Telnet:
telnet ip-address [oobm]
Management and Configuration Guide
TFTP:
copy tftp ... ip-address filename... [oobm]
Management and Configuration Guide
SNTP:
[ no ] sntp server priority priority ip-address [oobm] [version]
Management and Configuration Guide
TIMEP:
[ no ] ip timep [ dhcp | manual ip-address | [oobm]]
Management and Configuration Guide
RADIUS:
[ no ] radius-server host ip-address [oobm]
Access Security Guide
TACACS+:
[ no ] tacacs-server host ip-address [oobm]
Access Security Guide
DNS:
[ no ] ip dns server-address priority priority ip-address [oobm]
Management and Configuration Guide
Syslog:
[ no ] logging ip-address [[control-descr] | [oobm]]
Management and Configuration Guide
Ping:
ping [ ...] [source [ ip-address | vlan-id | oobm ]]
Application client commands 509