Management and Configuration Guide K/KA/KB.15.15

Example 22 Associating a key-id with a specific server
(HP_Switch_name#) sntp server priority 1 10.10.19.5 2 key-id 55
Enabling and disabling SNTP client authentication
The sntp authentication command enables SNTP client authentication on the switch. If SNTP
authentication is not enabled, SNTP packets are not authenticated.
Syntax
[no] sntp authentication
Enables the SNTP client authentication.
The no version of the command disables authentication.
Default: SNTP client authentication is disabled .
Viewing SNTP authentication configuration information
The show sntp command displays SNTP configuration information, including any SNTP
authentication keys that have been configured on the switch.
52 Time Protocols