Management and Configuration Guide K/KA/KB.15.15

Example 34 Showing IP addressing for all configured time servers and VLANs
HP Switch(config)# show management
Status and Counters - Management Address Information
Time Server Address : 10.10.28.100
Priority SNTP Server Address Protocol
Version
-------- ----------------------------------------------
----------------
1 10.10..28.101 3
2 10.255.5.24 3
3 fe80::123%vlan10 3
Default Gateway : 10.0.9.80
VLAN Name MAC Address | IP Address
------------ ------------------- + -------------------
DEFAULT_VLAN 001279-88a100 | 10.30.248.184
VLAN10 001279-88a100 | 10.0.10.17
Enabling TimeP mode
Enabling the TimeP mode configures it for either broadcast or unicast. Run TimeP as the switch's
time synchronization protocol and select TimeP as the time synchronization method by using the
CLI timesync command (or the menu interface Time Sync Method parameter.
Syntax
timesync timep
Selects TimeP as the time synchronization method.
Syntax
ip timep <dhcp|manual>
Enables the selected TimeP mode.
60 Time Protocols