KB.15.15

configuration.The recommended method for disabling time synchronization is to

use the timesync command.

Example 38 TimeP with time synchronization disabled

Suppose TimeP is running as the switch's time synchronization protocol, with DHCP

as the TimeP mode, and the factory-default polling interval. You would halt time

synchronization with this command:

HP Switch (config)# no timesync

If you then viewed the TimeP configuration, you would see the following:

HP Switch(config)# show timep

Timep Configuration

Time Sync Mode: Disabled

TimeP Mode : DHCP Poll Interval (min): 720

Disabling the TimeP mode

Syntax

no ip timep

Disables TimeP by changing the TimeP mode configuration to Disabled and

prevents the switch from using it as the time synchronization protocol, even if it is

the selected Time Sync Method option.

64 Time Protocols