KB.15.15

Example 39 Disabling time synchronization by disabling the TimeP mode parameter

If the switch is running TimeP in DHCP mode, no ip timep changes the TimeP

configuration as shown below and disables time synchronization. Even though the

TimeSync mode is set to TimeP, time synchronization is disabled because no ip

timep has disabled the TimeP mode parameter.

HP Switch(config)# no ip timep

HP Switch(config)# show timep

Timep Configuration

Time Sync Mode: Timep

TimeP Mode : Disabled

Viewing, enabling, and modifying the TimeP protocol(Menu)

1. From the Main Menu, select:

2. Switch Configuration

1. System Information

Figure 22 System Information screen (default values)

2. Press [E] (for Edit.)

The cursor moves to the System Name field.

3. Use â to move the cursor to the Time Sync Method field.

4. If TIMEP is not already selected, use the Space bar to select TIMEP, then press â once to display

and move to the TIMEP Mode field.

5. Do one of the following:

• Use the Space bar to select the DHCP mode.

Press â to move the cursor to the Poll Interval field.◦

◦ Go to step 6.

• Enabling TIMEP or DHCP

Time Sync Method [None] : TIMEP

TimeP Mode [Disabled] : DHCP

Poll Interval (min) [720] : 720

Time Zone [0] : 0

Daylight Time Rule [None] : None

Use the Spacebar to select the Manual mode.

Viewing, enabling, and modifying the TimeP protocol(Menu) 65