Management and Configuration Guide K/KA/KB.15.15
• "Internal dedicated-purpose resources" include the following features:
Per-port ingress and egress rate limiting through the CLI using rate-limit in/out•
• Per-port ingress and egress broadcast rate limiting through the CLI using rate-limit
bcast/mcast
• Per-port or per-VLAN priority or DSCP through the CLI using qos priority or qos
dscp
• Per protocol priority through the CLI using qos protocol
• For chassis products (for example, the 5400zl or 8212zl switches), 'slots' are listed instead
of 'ports,' with resources shown for all installed modules on the chassis.
• The "Available" columns display the resources available for additional feature use.
• The "IDM" column shows the resources used for RADIUS-based authentication with or without
the IDM option.
• "Meters" are used when applying either ICMP rate-limiting or a QoS policy with a rate-limit
class action.
74 Time Protocols