Management and Configuration Guide K/KA/KB.15.15

Current status : running
Description Version
Status
------------------------------------------ -------------------
---------
Services zl Module
hardware
HP MSM775 zl Premium Controller J9840A
installed
For more information, use the show commands in services context
Example
Status and Counters - Services Module F Status
HP Services zl Module J9840A
Versions :
Current status : running
Description Version
Status
------------------------------------------ -------------------
---------
Services zl Module
hardware
HP Adv Services v2 zl Module w/ HDD J9857A
installed
For more information, use the show commands in services context
Show services device
Adding the keyword “device” displays information about whether certain external devices are
enabled or disabled. This command is equivalent to the “services <slot> device” command with
no additional parameters.
Syntax
show services slot-id device
• USB port (x86–side)
nl
May be one of:
◦ “disabled” (normal state)
◦ “enabled” – enabled once the x86 boots into the OS, but disabled before
OS boot to prevent inadvertently booting to an inserted USB key.
◦ “boot” – enabled all the time, both for and after x86 OS boot.
• Shutdown
nl
Front-panel shutdown/reset button:
◦ “enabled” – default state
◦ “disabled” – for increased physical security
• PXE (PXE-boot)
nl
Not displayed for all modules.
78 Port Status and Configuration