Management and Configuration Guide K/KA/KB.15.15

<Slot-id> name <name> Configure parameters for the installed
application.
Services in Manager Context
Display applications installed and running for the services module or change the module's state
(reload or shutdown).
Syntax
services <slot-id>[<index>| boot | locator | name <name>|
reload |serial | shutdown]
slot-id Device slot identifier for the services module.
<slot-id> <index> Configure parameters for the
installed application.
<slot-id> boot Reboot the services module.
<slot-id> locator Controls services module locator
LED.
<slot-id> name <name> Configure parameters for the
installed application.
<slot-id> reload Reset the services module.
<slot-id> serial Connect to services module via
serial port.
<slot-id> shutdown Shutdown (halt) the services
module.
Boot Reboot the services module.
Integer Index of the services CLI to access.
Locator Control services module locator LED.
Name Name of the services CLI to access.
Reload Reset the services module.
Serial Connect to application via serial port.
Shutdown Shutdown (halt) the services module.
Services in configure context
Configure parameters for the services module or change the module's state (reload or shutdown).
Syntax
services [<slot-id> <index> boot | locator | name <name>|
reload |serial | shutdown]
Syntax
[no]services <slot-id>device[shutdown | usb
slot-id Device slot identifier for the services module.
<slot-id> <index> Configure parameters for the
installed application.
<slot-id> boot Reboot the services module.
<slot-id> locator Controls services module locator
LED.
<slot-id> name <name> Configure parameters for the
installed application.
80 Port Status and Configuration