Management and Configuration Guide K/KA/KB.15.15

Syntax
show services <slot>[blink <1-1440>|off|on]
blink Blink the locator LED. Default 30 mins. Range <1-1440>.
off Turn the locate led off.
on Turn the locate led on.
Example
HP-8212zl# show services d locator blink
Reloading services module
Reloads the services module and is similar to the command services<slot> boot with no
additional parameters given.
Syntax
services <slot> reload
Connection to the application via a serial port
Starts a serial-passthrough session to the x86.
Syntax
services <slot>serial
WARNING! You are entering a mode on this product that is HP Confidential and
Proprietary. This mode, the commands and functionality specific to this mode, and
all output from this mode are HP Confidential and Proprietary. You may use this
mode only by specific permission of, and under the direction of, an HP support
engineer or HP technical engineer. Unauthorized or improper use of this mode will
be considered by HP to be unauthorized modification of the product, and any
resulting defects or issues are not eligible for coverage under the HP product
warranty or any HP support or service. UNAUTHORIZED OR IMPROPER USE OF
THIS MODE CAN MAKE THE PRODUCT COMPLETELY INOPERABLE.
SvcOS login: <CTRL-Z>
Shutdown the services module.
Similar to services <slot>boot with no additional parameters given. This command is similar
in that it attempts a graceful shutdown of the x86 except that this command does not restart the
x86. If the graceful-shutdown attempt fails, no follow-up attempt is made to do a hard shutdown.
Syntax
services <slot>shutdown
Viewing the port VLAN tagged status
The show interfaces status command displays port status, configuration mode, speed,
type and tagged or untagged information.
Tagged values can be:
• VLAN ID: When the VLAN number is displayed, the port is a member of a single tagged
VLAN.
• multi: When “multi” is displayed, the port is a member of multiple tagged VLANs.
• no: When “no” is displayed, the port is not a member of any tagged VLAN.
82 Port Status and Configuration