KB.15.15

Untagged values can be:

• VLAN-ID: When the VLAN number is displayed, the port is a member of a single untagged

VLAN.

• multi: When “multi” is displayed, the port is added to multiple untagged VLANs.

• no: When “no” is displayed, the port is not a member of any tagged VLAN.

If the port is part of a trunk, then the trunk_VLAN membership is displayed in the Tagged and

Untagged columns.

Example

HP-Switch(config#) show interfaces status

Port Name Status Config-mode Speed Type Tagged Untagged

-------- -------- ------ ----------- ------- --------- ------ ---------

A1 Up Auto 1000FDx 100/1000T 2 1

A2 Down 10HDx 10HDx 100/1000T multi 2

A3 Down 100HDx 100HDx 100/1000T multi 3

A4 Down 10FDx 10FDx 100/1000T 5 4

A5-Trk1 Down 100FDx 100FDx 100/1000T No No

A6 Down Auto 1000FDx 100/1000T No 6

A7 Down Auto-10 10HDx 100/1000T No 7

Dynamically updating the show interfaces command

Syntax

show interfaces display

Uses the display option to initiate the dynamic update of the show interfaces command,

with the output being the same as the show interfaces command.

NOTE: Select Back to exit the display.

Example

HP Switch# show interfaces display

When using the display option in the CLI, the information stays on the screen and is updated every

3 seconds, as occurs with the display using the menu feature. The update is terminated with CTRL-C.

You can use the arrow keys to scroll through the screen when the output does not fit in one screen.

Dynamically updating the show interfaces command 83