HP StorageWorks Fabric OS 5.3.0d Release Notes (AA-RWEYH-TE, December 2007)

Closed defect summary
Solution
WebToolsismiss
ing “Invalid CRCS” under F abric W atch end to end
class pull down
menu, due to missing “CRC Error” option.
Fixed per Fabric OS 5.3.0
GUI component size squeezed due to lack of proper refresh after
resizing.
Fixed per Fabric OS 5.3.0
Errlog (raslog) messages not available for diagnosing DHCP
problems.
Fixed per Fabric OS 5.3.0
Web Tools allows (switch,port) members to be added as member of a
zone in interop mode, but t his won’t actually be created successfully.
Fixed in Fabric OS 5.3.0 by blocking
addition of D
,P members & D,P
zoning when i
n interop mode.
Some switches are segmented with reason alias ID overlap when
selected switches in fabric configured to use Alias Server due to lack
of Alias Server support in Fabric OS 5.2.0.
Fixed per Fabric OS 5.3.0
On Solaris, when switch already in marginal state and another
marginal event occurs, Events list in Call Home email not getting
updated with exact reason for the alert.
Fixed per Fabric OS 5.3.0
FCIP error message not correct while editing/adding the subnet mask
of an IP ad
dress that conflicts with the existing IP addresses.
Fixed per
Fabric OS 5.3.0
EZManager doesn’t differentiate por ts as storage a nd hosts if no
devices/hosts connections made.
Fixed per Fabric OS 5.3.0
During stress testing with large number of sent error frames leading to
gener ation of very big core file, and watchdog timer timeout.
Fixed per Fabric OS 5.3.0
Enc out c
ounter increases on unused ports on 2Gb platforms after
HAreboo
torfirmware download.
Fixed per Fabric OS 5.3.0
Web Tools is not displaying “logged in” Radius account information.
Fixed per Fabric OS 5.3.0
Units for temperature, Rx and Tx power are not shown on SFP tab
in Web Tools.
Fixed per Fabric OS 5.3.0
Web Tool
sdoesn’tdisplayunitsofTotal Bandwidth and Bandwidth
Demand
in Fabric Topology Window.
Fixed per Fabric OS 5.3.0
Web Tools incorrectly returns “Directory change failed” error
message rather than “file path provided is not valid” error message
when config upload fails due to invalid file path.
Fixed per Fabric OS 5.3.0
Modifying port speed and trunking on F C4-48 ports from Web Tools,
followed by HAfailover, a nd then trying to re-launch, Port Admin
window on those same ports fails to reload Web Tools window.
Fixed per Fabric OS 5.3.0
F_Port route cleanup doesn’t happen correctly when NPIV is used on
switch in Access Gateway mode.
Fixe
d per Fabric OS 5.3.0
EZSwitch Setup device display is overlapped in Display Connection
window when window size not maximized.
Fixed per Fabric OS 5.3.0
Portstatsclear help page description of behavior on 2Gb and
4Gb platforms is ambiguous.
Fixed per Fabric OS 5.3.0
FR4-18i tracedump files contain many BP error messages and one
emp
ty file, potentially leading to incomplete support files.
Fix
ed per Fabric OS 5.3.0
During stress testing when rebooting all core switches in a loop,
E-ports may get stuck in “Mod_Val” mode.
Fixed per Fabric OS 5.3.0
Error messages are generated when applying iSCSI easycreate
operationfromWebToolsonunreachableFCTargets. Noerror
messages if LUN information is not retrievable from an FC Target.
Errors are only displayed when applying the operation.
Fixed per Fabric OS 5.3.0
20