HP StorageWorks Fabric OS 5.3.0d Release Notes (AA-RWEYH-TE, December 2007)

Closed defec t su mmary
Solution
If Dynamic Load Sharing (DLS) or In-Order Delivery is disabled, it
can’t be enable
d from Web Tools. However, it can be set/reset via
CLI.
Fixed per Fabric OS 5.3.0
Web Tools event filtering uses a time range of 0-11 rather than 1-12.
In Web Tools Fabric Events and Events window, on invoking filter
button and filtering based on “from” time or “to” time, on pr oviding a
timegreaterthan12(e.g. 12:30PM)willresultinanerrorstating
that time should be in range of 0-11.
Fixed per Fabric OS 5.3.0
Additional Por t Info column in FC Ports tab in Web Tools shows
"None (FMS Mode)" instead of "Disabled (FMS Mode)."
Fixed per Fabric OS 5.3.0
FR4-18i blades rebooted during firmware commi t process per
firmwaredownloadstatus output. Process does recover.
Fixed per Fabric OS 5.3.0
With EZSwitchSetup, fixed zone can’t be configured with all
ports designated as storage or hosts. This is correct behavior,
but the message displayed doesn’t describe how to correct the
misconfiguration should the user attempt to configure in that manner.
Fixed per Fabric OS 5.3.0
Error messages occur during IPsec FCIP IO. Fixed per Fabric OS 5.3.0
Incorrect i nformation returned during Request Node Identification
Data (RNID) registration.
Fixed per Fabric OS 5.3.0
User sees wrong port type after port swap on issuing fwsamshow
from CLI, due to port type getting swapped in the SAM Report.
Fixed per Fabric OS 5.3.0
Due to current handling of invalid zone type during zone enforcement
after failover, Name Server daemon (nsd) panic results i n CP fault
after firmwaredownload.
Fixed per Fabric OS 5.3.0
Unable to view policy details in the absence of IPSEC license from
“ShowIPSecuritypolicies”.
Fixed per Fabric OS 5.3.0
After changing an expired password and selecting another Admin
Domain during the same session, the password expiration message
and password prompt are displayed again. Currently have to exit
session and re-login after changing an expired password to avoid
this issue.
Fixed per Fabric OS 5.3.0
Error messages from ACL configuration through SMI are too generic
and don’t contain sufficient information to debug the problem.
Fixed per Fabric OS 5.3.0
Ports
tats: Selecting the “Show delta” radio button and clicking on
the cl
ear counter button, doesn’t clear the counters. It changes the
valu
es to negative. Clicking the clear counter button again will reset
coun
ter to zero.
Fixed per Fabric OS 5.3.0
May see FFDC warning messages when manually changing switch IP
address in DHCP network.
Fixed per Fabric OS 5.3.0
Able to establish API session to Admin Domain 255 using “ user”
login which has Admin Domain membership only to Admin Domain
0,whichisnotallowedfromCLI,resultinginerror.UsersofSMIand
Web Tools won’t observe error because all operations performed
via Admin role user.
Fixed per Fabric OS 5.3.0
Web Tools currently not consistent with CLI on
nl
configuring long distance for ports if current Admin Doma in owns
them but not switchmembership.
nl
Port long distance settings are read-only for owned ports on
non-owned switches in Web Tools Extended Fabric tab, but editable
for owned ports in Web Tools port configuration wizard.
Fixed per Fabric OS 5.3.0
HP StorageWorks Fabric OS 5.3.0d release notes
21