HP StorageWorks Fabric OS 5.3.x administrator guide (5697-0244, November 2009)

268 Administering FICON fabrics
FICON commands
Table 61 summarizes the Fabric OS CLI commands that can be used for managing FICON fabrics. For
detailed information on these commands, refer to the Fabric OS Command Reference Manual.
Table 61 Fabric OS commands related to FICON and FICON CUP
Command Description
Standard Fabric OS commands:
configure Sets the domain ID and the insistent domain ID mode.
portSwap Swaps ports.
portSwapDisable Disables the portSwap command.
portSwapEnable Enables the portSwap command.
portSwapShow Displays information about swapped ports.
Commands specific to FICON:
ficonclear rlir Removes all RLIR records from the local RLIR database.
ficonclear rnid Removes all outdated RNID records from the local RNID database.
ficonshow ilir
[fabric]
Displays FRU failure information on the local switch or on the
fabric.
ficonshow lirr
[fabric]
Displays registered listeners for link incidents for the local switch or
for the fabric.
ficonshow rlir
[fabric]
Displays link incidents for the local switch or for the fabric.
ficonshow rnid
[fabric]
Displays node identification data for all devices registered with the
local switch or all devices registered with all switches defined in the
fabric.
ficonshow
switchrnid
[fabric]
Displays node identification data for the local switch or for the
fabric.
Commands specific to FICON CUP:
ficoncupset
fmsmode
Sets FICON Management Server mode on or off for the switch.
ficoncupset
modereg
Sets the mode register bits for the switch.
ficoncupshow
fmsmode
Displays the FICON Management Server mode setting for the
switch.
ficoncupshow
modereg
Displays the mode register bit settings for the switch.