HP StorageWorks Fabric OS 5.3.x administrator guide (5697-0244, November 2009)

Fabric OS 5.3.0 administrator guide 295
To view the overall status of the switch
1. Connect to the switch and log in as admin.
2. Enter the switchStatusShow command:
For more information on how the overall switch status is determined, refer to the
switchStatusPolicySet command in the Fabric OS Command Reference Manual.
To display switch information
1. Connect to the switch and log in as admin.
2. At the command line, enter the switchShow command. This command displays the following
information for a switch:
• switchname—Displays the switch name.
• switchtype—Displays the switch model and firmware version numbers.
• switchstate—Displays the switch state: Online, Offline, Testing, or Faulty.
• switchrole—Displays the switch role: Principal, Subordinate, or Disabled.
• switchdomain—Displays the switch Domain ID.
• switchid—Displays the embedded port D_ID of the switch.
• switchwwn—Displays the switch World Wide Name.
• switchbeacon—Displays the switch beaconing state: either ON or OFF.
The switchShow command also displays the following information for ports on the specified switch:
• Module type—The SFP type if a SFP is present.
• Port speed—The speed of the Port (1G, 2G, 4G, N1, N2, N4, or AN). The speed can be fixed,
negotiated, or auto negotiated.
• Port state—The port status.
• Comment—Displays information about the port. This section might be blank or display WWN for
F_Port or E_Port, Trunking state, upstream or downstream status.
The details displayed for each switch differ on different switch models. For more information refer to the
switchShow command in the Fabric OS Command Reference Manual.
switch:admin> switchstatusshow
Switch Health Report Report time: 03/21/2005 03:50:36 PM
Switch Name: SWFCR
IP address: 10.33.54.176
SwitchState: MARGINAL
Duration: 863:23
Power supplies monitor MARGINAL
Temperatures monitor HEALTHY
Fans monitor HEALTHY
WWN servers monitor HEALTHY
Standby CP monitor HEALTHY
Blades monitor HEALTHY
Flash monitor HEALTHY
Marginal ports monitor HEALTHY
Faulty ports monitor HEALTHY
Missing SFPs monitor HEALTHY
All ports are healthy
switch:admin>