HP StorageWorks Fabric OS 5.3.x administrator guide (5697-0244, November 2009)

Fabric OS 5.3.0 administrator guide 305
To enable the automatic transfer of trace dumps
1. Connect to the switch and log in as admin.
2. Enter the following command:
To set up periodic checking of the remote server
1. Connect to the switch and log in as admin.
2. Enter the following command:
The
interval is in hours. The minimum interval is 1 hour. Specify 0 hours to disable the checking feature.
To save a comprehensive set of diagnostic files to the server
1. Connect to the switch and log in as admin.
2. Enter the following command:
switch:admin> traceftp -e
switch:admin> supportftp -t interval
switch:admin> supportsave -c