HP StorageWorks Fabric OS 5.3.x administrator guide (5697-0244, November 2009)

396 Configuring and monitoring FCIP tunneling
Port numbering on the B-Series MP Router blade
There are sixteen physical Fibre Channel ports and two physical GbE ports on the B-Series MP Router
blade. The two GbE ports (ge0 and ge1) support up to eight FCIP tunnels each (each FCIP tunnel is
represented and managed as a VE_Port or VEX_Port).
Ports 0-15 correspond to the physical Fibre Channel ports, and ports 16-23 are logical Fibre Channel ports
on the physical GbE port, ge0. Ports 24-31 correspond to logical Fibre Channel ports on physical GbE
port, ge1 (refer to Figure 29).
Figure 29 B-Series MP Router Blade port numbering
You manage the B-Series MP Router blade as if it has thirty two Fibre Channel ports (sixteen standard Fibre
Channel ports, and sixteen virtual Fibre Channel Ports). Specify port addresses using the slot and port
numbers. For example, to disable VE_Port 18 on slot 1, the syntax is portDisable 1/18. To disable
GbE port 1 on slot 1, the syntax is portDisable 1/ge1.
7
6
5
4
3
2
1
0
GE1
GE0
15
14
13
12
11
10
9
8
56-0000590-01 Rev A
!
FR4
18i
scale:
5/16" = 1"
15
14
13
12
15
14
13
12
11
10
9
8
11
10
9
8
7
6
5
4
7
6
5
4
3
2
1
0
3
2
1
0
GE
1
GE
0
GE
1
GE
0
GbE Ports
Fibre Channel
Port (#3)
FR4-18i
AP Blade